MAK COOL TANKHeat Insulating Coating for PVC Pipes Category: Liquid Applied Waterproofing CoatingMak Cool Tank is an innovative coating combining strength, light weight protection and integral insulation ideally designed for Thermal insulation of all sorts of PVC tanks. It is a seamless, monolithic membrane impervious to adverse weathering and extreme temperature fluctuations. Packing: Mak Cool Tank is available in 1 kg packs. Coverage: 1Kg Mak Cool Tank is sufficient for coating of 500 L capacity PVC Tank in 2 coats. Storage: Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. MAK COOL TANKHeat Insulating Coating for PVC Pipes Category: Liquid Applied Waterproofing CoatingMak Cool Tank is an innovative coating combining strength, light weight protection and integral insulation ideally designed for Thermal insulation of all sorts of PVC tanks. It is a seamless, monolithic membrane impervious to adverse weathering and extreme temperature fluctuations. Packing: Mak Cool Tank is available in 1 kg packs. Coverage: 1Kg Mak Cool Tank is sufficient for coating of 500 L capacity PVC Tank in 2 coats. Storage: Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. KEY FEATURES10oC – 18oC variation in surface temperature of tank, during peak summer.Keeps water temperature close to ambient.All year-round protection: In addition to reducing conductive heat transfer micro spheres reflect away radiant energy or heat from the sun during the summer months and in winter they prevent radiant heat from leaving the building.Ease of application -By brush. AREAS OF APPLICATIONPVC Tanks.Application Procedure: Clean the substrate and make it free from any dirt or loose particles. Scrub the cleaned surface mildly, using sand paper, to create a rough surface for better adhesion. 10-15% dilution with water is recommended to make the material brush-able. Apply Mak Cool Tank in 2 coats application over the cleaned surface with an interval of 3-4 hours between each coat.
