Waterproof Coating

Approx. Rs 220 / KgGet Latest Price

Product BrochureProduct Details:

MAK ELASTOTHANE EMW-WB WATER BASE UV-RESISTANT POLYURETHANE WATERPROOFING
Category: Liquid Applied Waterproofing Coating. MAK ELASTOTHANE EMW-WB is high performance water proofer that dries to form a tough impermeable coating. It is a single component, long lasting, permanently elastic, polyurethane dispersion in water that may be applied during various seasons and weather conditions.
Excellent crack bridging capacity. Highly flexible.Excellent bonding to substrate such as concrete, masonry, wood, metal, plastic, etc.Very good bonding to damp surfaces.Provides a key to plaster on difficult surfaces.Easy to use.Storage: Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
PRIMARY APPLICATIONSAs an impervious waterproofing membraneUseful on concrete and brick foundations, retaining walls and bridge abutments.For protection of Interior and exterior walls.Can be used as adhesive to bond wood blocks, expanded polystyrene and cork tiles to any surface.Trafficable roofs (light traffic)Tin sheds, Asbestos sheets waterproofing
DIRECTIONS FOR USEThe surface to be coated should be free from all loose particles, dust, oil and laitance. All visible cracks should be opened in ‘V’ grove and filled with repair mortarThe primer coat is applied by diluting MAL ELASTOTHANE EMW-WB with 50% waterMAK ELASTOTHANE EMW-WB is applied in min. 2 coat application. 10-15% dilution with water is recommended to make the material  brushable. Minimum 4-6 hours gap should be given between coats for drying.Reinforce the layers with 40-45 gsm fiber glass or nonwoven polyester cloth foradditional strength.

Approx. Rs 300 / KgGet Latest Price

Product BrochureProduct Details:

MAK ELASTOTHANE EMB-WBWATER BASE BITUMEN MODIFIED POLYURETHANE WATERPROOFING
Category: Liquid Applied Waterproofing CoatingMAK ELASTOTHANE EMB-WB is high performance water proofer that dries to form a tough impermeable coating. It is a blend of tropical grade bitumen emulsion in polyurethane dispersion.
Excellent crack bridging capacity. Highly flexible.Excellent bonding to substrate such as concrete, masonry, wood, metal, plastic, etc.Very good bonding to damp surfaces.Provides a key to plaster on difficult surfaces.Easy to use.Storage: Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
PRIMARY APPLICATIONSAs an impervious waterproofing membrane.Useful on concrete and brick foundations, retaining walls and bridge abutments.For protection of Interior and exterior walls.Can be used as adhesive to bond wood blocks , expanded polystyrene and cork tiles to any surface.Could be used as a primer/ bond coat on bituminous substrates for bonding.
DIRECTIONS FOR USEThe surface to be coated should be free from all loose particles, dust, oil and laitance. All visible cracks should be opened in ‘V’ grove and filled with repair mortar.MAK ELASTOTHANE EMW-WB is applied in min. 2 coat application. 10-15% dilution with water is recommended to make the material brushable. Minimum 4- 6 hours gap should be given between coats for drying.

Approx. Rs 250 / KgGet Latest Price

Product BrochureProduct Details:

MAK ELASTOCRYL K10White Elastomeric Waterproofing Cum Heat Reflecting Coating
Category: Liquid Applied Waterproofing CoatingMak Elastocryl K-10 is a single component, liquid applied, highly resilient waterproofing cum heat reflective system based on newly developed plasticized acrylic resin blended with heat reflective micro-spheres. It cures on exposure to the atmosphere and forms an elastomeric seamless membrane.
Packing: Available in 1kg, 4kg and 20 Kg pails.
Coverage: Generally, Mak Elastocryl K-10 will cover appx. 2 – 2.5 sqm/ 2 coat/ kg. The coverage can vary depending on the porosity of the substrate and the thickness required.
Storage: Store under cover, in a cool place away from direct sunlight. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
KEY FEATURESSingle component, water based, ready to use material.Prevent mess and objectionable odour completely.Eco-friendly, non-inflammable and non–toxic.It has a thixotropic consistency and may be used on horizontal as well as vertical surfaces.It has superior flexibility and elongation properties which allow expansion and contraction with the substrate, without cracking or becoming brittle.It gives a surface temperature variation of 10 C–15 C in peak summer, therefore reduces electricity consumption.
AREAS OF APPLICATIONRoof decks and walls, either of concrete/mortar, wood or metal etc.It can be used over spray applied PU foam and other materials that are UV degrading.All sort of roofs for waterproofing and heat reflection.

Approx. Rs 120 / KgGet Latest Price

Product Details:

MAK CRETE 2KCategory: Liquid Applied Waterproofing CoatingMAK Crete 2K is a pre – packed two component polymer modified cementitious coating, which can be easily mixed on site to form a smooth slurry then applied with brush or roller. This coating cures to form elastomeric waterproofing membrane with excellent adhesion to cementitious surfaces. This should be applied onto damp substrates, internal and external wet areas. The cured membrane is flexible, durable, weather-resistant to most substrates.
Primary Uses:MAK Crete 2K is best suitable for the waterproofing of water retaining structures like potable water tanks, reservoirs, canals, culverts, etc. It is suitable for use in foundations, basements, sunken areas, terraces, parking deck and sealing pre-cast joint. It can also be used to treat efflorescence.
ADVANTAGES
Withstands high positive hydrostatic pressure and negative pressure.
Excellent crack bridging capacity
Excellent bonding to substrate such as concrete, masonry, etc.
Good bonding to damp surfaces.
Food Grade – Can be used for treatment in potable water tanks.
Breathable
Able to take foot traffic when cured.
Non-toxic
Direct plaster or screed without affecting bond.
DIRECTIONS FOR USE
The surface to be coated, should be free from all loose particles, dust, oil and laitance. All visible cracks should be opened in ‘V’ grove and filled with MAK Sealing Compound, a single component crack filling compound.
Mak Crete 2K comes in a pre- packed 2 component system which include 5L liquid and 8 Kg powder. Mix both the components in a clean container using a power drill or manual mixer.
Minimum 2 coats are advised of the mix at a consumption rate of 1.3 to 1.5 Kg per sqm/ 2 coats.

Approx. Rs 440 / KgGet Latest Price

Product Details:

INSTA FLEX WHITEELASTOMERIC WATERPROOFING SYSTEM
Category: Retail RangeINSTA FLEX WHITE is a single component, liquid applied, highly- resilient waterproofing system based on newly developed plasticized acrylic resin with ultra violet resistant pigments. It cures on exposure to the atmosphere and forms an elastomeric seamless membrane.
Packing: INSTA FLEX WHITE is available in 1, 5 and 25 Kg Pails
Coverage: INSTA FLEX WHITE will cover appx. 1.5 – 2 sqmt/ 2 coats/ kg. The coverage can vary depending on the porosity of the substrate.
Storage: Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
FEATURESSingle component, ready to use material.Does not create mess and objectionable odour.Non – flammable, water based, non – toxic and environmentally safe.It has a thixotropic consistency and may be used on horizontal as well as vertical surfaces.The superior flexibility and elongation properties allow expansion and contraction with the substrate, without cracking or becoming brittle.PRIMARY APPLICATIONSRoof decks and walls [ either concrete or mortar, wood or metal]Can be applied over spray applied PU foam and other materials that are Ultra – Violet degrading.For waterproofing of slopy roofs.
DIRECTIONS FOR USESurface Preparation: Concrete, mortar and masonry surface must be clean, free from grease, oil and loosely adhering particles. Steel and iron surfaces must be free from scale, rust, grease and oil. All surfaces must be as true and flat as possible. Efficient surface preparation is essential to achieve high adhesive quality of the product.
Application: INSTA FLEX WHITE can be applied using brush, roller or spray. Minimum of two coats should be applied. 2nd coat should be applied once the 1st coat is dry. 10 – 15% water can be added to make the coating brushable. For application over wood, metal surfaces and bitumen based substrates, it is advised to use INSTA FLEX BLACK [1 part INSTA FLEX BLACK : ½ part Water, as primer, before using INSTA FLEX WHITE.