M.K. Petro Products India Private Limited

MAK CRETE 2K SUPERCategory: Liquid Applied Waterproofing CoatingMak Crete 2K Super is a pre-packed two component polymer modified cementitious coating, which can be easily mixed on site and applied with brush or roller. This coating cures to form elastomeric waterproofing membrane with excellent adhesion to cementitious surfaces.
Key Features:
Withstands high positive hydrostatic pressureExcellent crack bridging capacityExcellent bonding to substrate such as concrete, masonry, etc.Very good bonding to damp surfaces.Food Grade. Can be used for treatment in potable water tanks.Breathable.
AREAS OF APPLICATION:Mak Crete 2K Super is best suitable for the waterproofing of water retaining structures like potable water tanks, reservoirs, canals, culverts, etc. It is suitable for use in foundations, basements, sunken areas and terraces also.
APPLICATION PROCEDUREThe surface to be coated should be free from all loose particles, dust, oil and laitance. All visible cracks should be opened in ‘V’ grove and filled with Mak Crack-O- Fill, a single component crack filling compound.Mak Crete 2K Super comes in a pre-packed 2 component system which include 5Ltr liquid and 15 Kg powder. Add powder component with liquid in a clean container using a power drill or manual mixer. The powder component should be added gradually to the liquid to avoid lump formation and mixed for 2-4 minutes.Minimum 2 coats are advised of the mix to be applied.
TECHNICAL SPECIFICATIONSCHARACTERISTICS RESULTSColour                   GreyDensity              1.7 gm / cm3Tensile Strength-0.70 N/mm2[As per ASTM D 638]Toxicity                              Non-toxicCracking                No CrackingPot Life              30 Min. At 28°CApplication Temperature Not less than 5°C

Mak Envirocool is a nano insulation technology infused micro fiber reinforce waterproofing coating system. It is a single component liquid applied flexible waterproof & ultra violet resistance liquid membrane suitable for all types of expose roof, slab, terrace, sheds etc.

Mak Crystal Seal is a crystalline waterproofing slurry for concrete substrates. It is very economic and easy to apply. Mak Crystal Seal becomes part of the concrete and creates a waterproof layer inside the concrete itself.

Additional Information:

• Delivery Time: 7 Days

Single component, solvent free, polyurethane injection system ideally suitable for crack injections , water leakages, void filling in and beyond concrete and masonry structures. Reaction with water yields a semi-flexible closed cell polyurethane foam. To be injected with a Single-component pump. Use with 5% to 10% catalyst.

MAK ELASTOTHANE EMB-WB is high performance water proofer that dries to form a tough impermeable coating. It is a blend of tropical grade bitumen emulsion in polyurethane dispersion.

Additional Information:

• Delivery Time: 3-5 Days